Machine Modelling and Simulations

Conference Schedule

05. 09. 2023

11:00 - 14:00

• Registration

12:00 - 13:30

• Lunch

13:30 - 14:00

• Conference opening: 

  Room A

13:59 - 15:30

• Invite presentation: 

  Room A

  Chairmans: Prof. Milan Sága, Assoc. Prof. Elżbieta Gawrońska

14:00 - 14:30

• Bernhard Moeginger, Julian Rech, Berenika Hausnerova, Effects of fiber matrix adhesion on the creep behavior of short fiber reinforced polymer composites
  Room: A

14:30 - 15:00

• Marcin Kubiak, Zbigniew Saternus, Tomasz Domański, Wiesława Piekarska, Modelling of Yb:YAG laser + arc heat source used for car frames welding
  Room: A

15:00 - 15:30

• Jana Šulcová, Iveta Papučová, Jana Pagáčová, Andrej Dubec, Katarína Moricová, Maroš Dedinský, Surface Properties of Solid Materials with TiO2 Layer
  Room: A

15:30 - 16:00

• Cooffe Break

15:59 - 17:00

• Section 1: 

  Room A

  Chairmans: Prof. Darina Ondrušová, Prof., PhD. Michał Bembenek

16:00 - 16:15

• Alyona Lovska, Analysis of the load of the box wagon body with the sandwich-panel floor
  Room: A

16:15 - 16:30

• Antoni Niepokólczycki, Digital Trends in Aeronautical Fatigue and Structural Integrity
  Room: A

16:30 - 16:45

• Konrad Jan Waluś, The impact of load and pressure changes on the static radius and the length of the track of tire contact with the road surface
  Room: A

16:45 - 17:00

• Jozef Bucha, František Palčák, Theoretical basis for advanced management of the work of the ADAMS/Solver during multiphysics simulations according to the principles of the TRIZ approach.
  Room: A

17:30 - 18:30

• Meeting of the scientific committee

19:00 - 20:00

• Dinner

06. 09. 2023

07:00 - 08:30

• Breakfast

08:29 - 10:00

• Section 2: 

  Room A

  Charimans: Prof. Marek Macko, Dr. Lenka Jakubovičová
  

08:30 - 08:45

• Alzbeta Sapietova, Vladimir Dekys, Zdenko Savrnoch, Jakub Dolinay, Milan Sapieta, Synthesis and optimization of special mechanisms using Matlab and Adams
  Room: A

08:45 - 09:00

• Milan Sapieta, Vladimír Dekýš, Alžbeta Sapietová, Kinematic synthesis of the mechanical system of the landing gear of a transport aircraft
  Room: A

09:00 - 09:15

• Barbora Drvárová, Vladimír Dekýš, Zdenko Šavrnoch, Contribution to the determination of the damping of S235JR steel used in automotive industry
  Room: A

09:15 - 09:30

• Zdenko Šavrnoch, Alžbeta Sapietová, Michal Paulec, Influence of the gyroscopic effect on the behaviour of the rotor system with a flexible shaft
  Room: A

09:30 - 09:45

• Grzegorz Domek, Piotr Krawiec, Elżbieta Gawrońska, Modeling the structure of welded timing belt joints
  Room: A

09:45 - 10:00

• Zuzana Malacká, Peter Malacký, Ján Šimon, Zuzana Sedliačková, Applications of electric truck in transport logistic
  Room: A

10:00 - 10:30

• Coffee break

10:29 - 12:00

• Section 3: 

  Room A

  Chairmans: Prof. Mariana Pajtášová, Prof. Grzegorz Jan Domek

10:30 - 10:45

• Michal Paulec, Increasing the fatigue life of forging tools designed for the production of automotive hinges.
  Room: A

10:45 - 11:00

• Ivana Klačková, Composite structure design of ultralight aircraft landing gear
  Room: A

11:00 - 11:15

• Miroslav Repka, Analysis of cracks in solids with flexomagnetic effect
  Room: A

11:15 - 11:30

• Ladislav Sátor, Miroslav Repka, Analysis of FGM magneto-electro-elastic micro/nano plates by Moving Finite Element Method
  Room: A

11:30 - 11:45

• Pavol Michal, Milan Vaško, Milan Sapieta, Jaroslav Majko, Zdenko Šavrnoch, Michal Paulec, Bump testing of 3D printed composite structures and their numerical analysis.
  Room: A

11:45 - 12:00

• Marek Macko, Damian Pietrusiak, Paweł Cyprys, Andrzej Szczepańczyk, Kacper Fiedurek, IMPLEMENTATION OF CAD/CAE TOOLS FOR MACHINE AND PROCESS DESIGN
  Room: A

12:00 - 13:30

• Lunch

13:29 - 15:00

• Section 4: 

  Room A

  Chairmans: Prof. Alžbeta Sapietová, Prof. Bernhard Moeginger

13:30 - 13:45

• Saltanat Nurkusheva, Michał Bembenek, ESTIMATING OF THE OPTIMAL SERVICE INSPECTION INTERVALS OF THE GERMAN BRANDS PASSENGER CARS IN KAZAKHSTAN – A CASE STUDY
  Room: A

13:45 - 14:00

• Jan Krmela, Vladimíra Krmelová, Computational Simulations of Selected Mechanical Tests of Polymer Composites at Selected Temperatures
  Room: A

14:00 - 14:15

• Maciej Berdychowski, Jacek Górecki, Modeling of the properties of porous structures made by 3D printing
  Room: A

14:15 - 14:30

• Grzegorz Jan Domek, Drive belt model with electrical signal transmission functionality
  Room: A

14:30 - 14:45

• Krzysztof Talaśka, Dominik Wojtkowiak, Dominik Wilczyński, Krzysztof Wałęsa, Grzegorz Domek, Critical stress-strain state of the steel belt material used in a belt press
  Room: A

14:45 - 15:00

• Lenka Jakubovičová, Pavol Novák, Peter Kopas, Ondrej Piroh, Finite Element Analysis of plastic riveted joint of the car´s door panel
  Room: A

15:00 - 15:30

• Coffee break

15:29 - 17:00

• Section 5: 

  Room A

  Chairmans: Asocc. Prof. Katarína Moricová, Assoc. Prof. Krzysztof Talaśka

15:30 - 15:45

• Tomasz Domański, Marcin Kubiak, Zbigniew Saternus, Wiesława Piekarska, Strength analysis of laser-welded sheets in the lap system
  Room: A

15:45 - 16:00

• Ondrej Piroh, Lenka Jakubovičová, Milan Vaško, Peter Kopas, Computer vision as a tool for non – contact deformation measurement
  Room: A

16:00 - 16:15

• Jędrzej Stanisław Więckowski, Przemysław Moczko, Damian Pietrusiak, Measurement of traction effort under operating conditions.
  Room: A

16:15 - 16:30

• Michał Kończak, Design considerations concerning a innovative drive system for a manual wheelchair
  Room: A

16:30 - 16:45

• Silvia Maláková, Construction design of equipment for the transportation of oversized cargo
  Room: A

16:45 - 17:00

• Łukasz Gierz, Conceptual design and strength analysis of a laboratory pulsating-floidized bed dryer
  Room: A

19:00 - 23:59

• Evening party

07. 09. 2023

07:00 - 08:30

• Breakfast

08:29 - 10:00

• Workshop MSC. Adams, part 1: 

  Room B

  Participants of the ADAMS program's work training are recommended to study the following materials at home as part of their preparation:

  - ADAMS Tutorial Kit (MSC Software) for Mechanical Engineering Faculties with reference to the textbook:

  - Design of Machinery (Section I: Beginner’s Level) by Robert L. Norton for the basic training of beginners to work with the ADAMS program: MSC.ADAMS/FSP (Full Simulation Package: A/View, A/PostProcessor, A/Solver).

  Material for study

• Section 6: 

  Room A

  Chairmans: Assoc. Prof. Silvia Maláková, Asocc. Prof. Vladimir Dekys

08:30 - 08:45

• Jan Górecki, Influence of chanell shape of multichannel die on the value fo limit force of extrusion process and finall densisty of pellet
  Room: A

08:45 - 09:00

• Mikołaj Spadło, Grzegorz Ślaski, Experimental Research on New Mounting Methods for Vibration Testing of Electric Vehicle Battery Packs on Electromagnetic Exciter
  Room: A

09:00 - 09:15

• Denis Molnár, Miroslav Blatnický, Ján Dižo, Vadym Ishchuk, Analytical dimensional calculation of a hollow shaft of technical equipment operating in the amusement industry
  Room: A

09:15 - 09:30

• Miroslav Blatnický, Ján Dižo, Denis Molnár, Vadym Ishchuk, Structural Design of a Rotary Valve Manipulator of Bulk Materials – Strength Design of Connecting Elements of the Frame and Trolley
  Room: A

09:30 - 09:45

• Katarína Pijáková, Milan Sága, Marián Handrik, Milan Vaško, Jaroslav Majko, Use of new simulation tools in the simulation of structural elements of vehicles
  Room: A

09:45 - 10:00

• Martina Fusková, Jan Krmela, Vladimíra Krmelová, Models of polymer surface degradation in application simulation
  Room: A

10:00 - 10:30

• Coffee break

10:29 - 12:00

• Workshop MSC. Adams, part 2: 

  Room B

  Participants of the ADAMS program's work training are recommended to study the following materials at home as part of their preparation:

  - ADAMS Tutorial Kit (MSC Software) for Mechanical Engineering Faculties with reference to the textbook:

  - Design of Machinery (Section I: Beginner’s Level) by Robert L. Norton for the basic training of beginners to work with the ADAMS program: MSC.ADAMS/FSP (Full Simulation Package: A/View, A/PostProcessor, A/Solver).

  Material for study

• Section 7: 

  Room A

  Charimans: Assoc. Prof. Piotr Krawiec, Dr. Alyona Lovska,

10:30 - 10:45

• Alicja Madej, Joanna Sawicz, Bartosz Wieczorek, Łukasz Warguła, Zhivko Kolev, Analysis of the movement of the upper limbs of a human in terms of the use of a car by people with physical disabilities - independent loading of a wheelchair
  Room: A

10:45 - 11:00

• Dominik Wilczyński, Krzysztof Wałęsa, Krzysztof Talaśka, Dominik Wojtkowiak, Research on the parameters of cutting process of corn stalk
  Room: A

11:00 - 11:15

• Dominik Wojtkowiak, The influence of the punch velocity on the belt perforation process
  Room: A

11:15 - 11:30

• Mateusz Kukla, The influence of the center of gravity position on axle load and the friction force
  Room: A

11:30 - 11:45

• Katarína Moricová, Miriama Šarkeziová, Róbert Janík, Mariana Pajtášová, Hydroxyapatite and its synthesis
  Room: A

11:45 - 12:00

• Grzegorz Waldemar Ślaski, Mikołaj Spadło, Analysis of Standard and Latest Mounting Techniques for Potential Use in Vibration Testing of Electric Vehicle Battery Packs on Electromagnetic Exciters: Advantages and Disadvantages
  Room: A

12:00 - 13:30

• Lunch

15:30 - 18:00

• Visit of the castle

19:00 - 20:00

• Dinner

08. 09. 2023

07:00 - 08:30

• Breakfast

08:29 - 09:15

• Section 8: 

  Room A

  Chairmans: Prof. Milan Sága, Asocc. Prof. Tomasz Domański

08:30 - 08:45

• Darina Ondrušová, Slavomíra Božeková, Mariana Pajtášová, Zuzana Mičicová, Ivan Labaj, Katarína Moricová, Silvia Ďurišová, Simona Lokšíková, Effect of alternative carbon-based filler on rubber compound properties
  Room: A

08:45 - 09:00

• Mariana Pajtášová, Zuzana Mičicová, Darina Ondrušová, Slavomíra Božeková, Róbert Janík, Katarína Moricová, Silvia Ďurišová, Simona Lokšíková, Characterisation of treated fillers used in rubber matrix polymer materials
  Room: A

09:00 - 09:15

• Jaroslav Majko, Marián Handrik, Milan Vaško, Milan Sága, Initial study into tensile properties of pure nylon and nylon reinforced with chopped carbon fiber produced by FFF method
  Room: A

09:15 - 09:30

• Conference closing: 

  Room A

  Chariman: Prof. Milan Sága,

11:00 - 12:30

• Lunch