Browse Title Index


 
Scheduled Conference Title
 
Machine Modelling and Simulations 2019 3D simulations of solidification with liquid phase flow Abstract
Elżbieta Gawrońska, Robert Dyja
 
Machine Modelling and Simulations 2019 3D technology implementation in medicine Abstract
Marek Macko, Zbigniew Szczepański, Dariusz Mikołajewski, Emilia Mikołajewska, Jacek Furtak
 
Machine Modelling and Simulations 2019 An application of the Kalman filter in automated guided vehicles Abstract
Magdalena Dobrzanska, Pawel Dobrzanski
 
Machine Modelling and Simulations 2019 Analysis and structuring diagnostic large volume data of technical condition of complex equipment in transport Abstract
Vladimir Vychuzhanin, Nickola Rudnichenko, Zuzana Sagova, Miroslaw Smieszek, Vasyl Cherniavskyi, Andrii Golovan, Mykyta Volodarets
 
Machine Modelling and Simulations 2019 Analysis of angular deflection of bearing node in machine with toothed transport belt Abstract
Maciej Berdychowski, Ireneusz Malujda, Krzysztof Wałęsa, Aleksandra Fierek
 
Machine Modelling and Simulations 2019 Analysis of heat transfer coefficients for simulation of the heat exchange between oil and the internal cavity faces of the isolated piston at variable gravity conditions Abstract
Aleksandr Bilohub, Nguyen Van Duong, Feliks Sirenko, Volodymyr Savchuk, Ievgen Bilousov, Roman Symonenko, Ivan Zajačko
 
Machine Modelling and Simulations 2019 Analysis of residual stresses of aging austenitic steel designed for nuclear industry Abstract
Michal Sajgalik, Jozef Holubjak, Ondrej Kubala, Michal Richtarik, Tatiana Czanova, Mario Drbul
 
Machine Modelling and Simulations 2019 Analysis of residual stresses on guide bar of chainsaw Abstract
Ján Kostka, Peter Čarák, Peter Frankovský, Matúš Adamuščin
 
Machine Modelling and Simulations 2019 Analysis of shaft selection in terms of stiffness and mass Abstract
Aleksandra Fierek, Ireneusz Malujda, Dominik Wilczyński, Krzysztof Wałęsa
 
Machine Modelling and Simulations 2019 Analysis of size of shredded particles in a multi-disc grinder Abstract
G Smigielski, Krzysztof Tyszczuk, A Mroziński
 
Machine Modelling and Simulations 2019 Analysis of stability of stressed-skin constructions for transport of bulk raw materials Abstract
Marian Dudziak, Paweł Knast, Krzysztof Talaśka
 
Machine Modelling and Simulations 2019 Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block Abstract
Dominik Wojtkowiak, Krzysztof Talaśka, Maciej Berdychowski
 
Machine Modelling and Simulations 2019 Analysis of threaded connections under impact load Abstract
Krzysztof Talaśka, Dominik Wojtkowiak
 
Machine Modelling and Simulations 2019 Application of alternative additives in the polymer composite systems used in automotive industry Abstract
Darina Ondrušová, Ivan Labaj, Juliána Vršková, Mariana Pajtášová, V Zvoláneková Mezencevová
 
Machine Modelling and Simulations 2019 Application of the Mohr-Coulomb model for the simulation of the biomass compaction process Abstract
Maciej Berdychowski, Krzysztof Talaśka, Ireneusz Malujda, Mateusz Kukla
 
Machine Modelling and Simulations 2019 Assessment of traffic noise for medium heavy vehicles in octave bands Abstract
Andrzej Bąkowski, Vladimir Dekýš, Leszek Radziszewski, Paweł Świetlik
 
Machine Modelling and Simulations 2019 Biomass cutting tests to determine the lowest value of the process force Abstract
Dominik Wilczyński, Krzysztof Wałęsa, Maciej Berdychowski, Mateusz Kukla
 
Machine Modelling and Simulations 2019 CAE analysis and simulations of technological processes of selected high strength steels Abstract
Jozef Majerík, Igor Barényi, Michal Ladecký, Michal Krbaťa
 
Machine Modelling and Simulations 2019 Calculation of stiffness of triple spring in a rail vehicle Abstract
Andrej Suchánek, Mária Loulová
 
Machine Modelling and Simulations 2019 Comparison of experimental flexural test with FE analysis for specimen with different size and shape of internal structure created by 3D printing's Abstract
Filip Dorčiak, Milan Vaško, František Bárnik, Jaroslav Majko
 
Machine Modelling and Simulations 2019 Complex designing of granulation units with application of computer and software modeling: case "Vortex granulator" Abstract
Artem Artyukhov, Nadiia Artyukhova, Jan Krmela, Vladimíra Krmelová
 
Machine Modelling and Simulations 2019 Computation of temperature field by cell method and comparing with commercial software Abstract
Marek Pernica, Tomáš Létal, Pavel Lošák, Martin Naď
 
Machine Modelling and Simulations 2019 Construction design and structural analyse of transfer system Abstract
Lenka Jakubovičová, Peter Kopas, Marián Handrik, Milan Vaško, Róbert Grega, Peter Šulka
 
Machine Modelling and Simulations 2019 Construction proposal of shipping bulk container Abstract
ROBERT POKLEMBA, J Zajac, D Goldyniak, I Olexa, M Dilýová
 
Machine Modelling and Simulations 2019 Control of the TTM positioner based on correcting procedures Abstract
Maciej Bodnicki, Wojciech Credo, Karol Bagiński, Michał Bartyś, Leszek Wawrzyniuk
 
Machine Modelling and Simulations 2019 Design of new multifunctional clamping jaws for thermomechanical simulator Abstract
Tomas Kalina, Vaclav Marek, Stepan Jenicek, Frantisek Sedlacek, Zdenek Chval
 
Machine Modelling and Simulations 2019 Design problems of axisymmetric connections in the aspect of machine engineering drawings Abstract
Andrzej Kołodziej, Marian Dudziak, Krzysztof Talaśka
 
Machine Modelling and Simulations 2019 Determination of engine oil characteristics Abstract
Katarína Moricová, Iveta Papučova, Silvia Ďurišová, Robert Janík
 
Machine Modelling and Simulations 2019 Determination of the strength of a flat wagon by elastic viscous interaction with tank containers Abstract
Oleksij Fomin, Juraj Gerlici, Alyona Lovska, Tomas Lack, Natalia Bykovets, Halyna Shatkovska, Kateryna Kravchenko
 
Machine Modelling and Simulations 2019 Determination of the vibration emission level for a chipper with combustion engine Abstract
Michał Kończak, Mateusz Kukla, Łukasz Warguła, K Talaska
 
Machine Modelling and Simulations 2019 Development and design of new mechanical forging presses Abstract
Martin Zahalka, K Raz
 
Machine Modelling and Simulations 2019 Digital filtration methods in selected industrial applications Abstract
Pawel Dobrzanski, Magdalena Dobrzanska
 
Machine Modelling and Simulations 2019 Dynamic analysis of an freight railway wagon for safe rides along an S-shaped curve Abstract
Pavol Šťastniak, Marián Moravčík
 
Machine Modelling and Simulations 2019 Dynamic modelling of elastic plates reinforced by strong fibres Abstract
Dragan Milosavljevic, Alzbeta Sapietova, Milan Zmindak, Vladimir Dekys, Pavol Novak
 
Machine Modelling and Simulations 2019 Dynamic properties of pneumatic transport in a oilseed grinder Abstract
Grzegorz Śmigielski, Krzysztof Tyszczuk, Adam Mroziński, Kazimierz Peszyński
 
Machine Modelling and Simulations 2019 Effect of alternative filler from glass industry on the selected properties of friction polymer matrix in automotive industry Abstract
Juliána Vršková, Darina Ondrušová, Ivan Labaj, Ivan Kopal
 
Machine Modelling and Simulations 2019 Effect of deformation parameters on microstructure evolution and properties of 33NiCrMoV15 steel Abstract
Igor Barényi, Michal Krbaťa, Jozef Majerík, Ivana Mikušová
 
Machine Modelling and Simulations 2019 Elastomer modification by means of ionizing radiation Abstract
Valeryia Bobrova, Andrei Kasperovich, A Mozyrev, Jan Krmela, Vladimíra Krmelová
 
Machine Modelling and Simulations 2019 Energy optimal trajectories for electro-mechanical systems Abstract
Pavol Oršanský, Branislav Ftorek, Ján Vittek
 
Machine Modelling and Simulations 2019 Evaluate of the influence of time delays on effectiveness of nonlinear saturation controller. Part I: Modeling Abstract
Andrzej Mitura, Rafal Rusinek
 
Machine Modelling and Simulations 2019 Evaluate of the influence of time delays on effectiveness of nonlinear saturation controller. Part II: Numerical results Abstract
Andrzej Mitura, Rafal Rusinek
 
Machine Modelling and Simulations 2019 Evaluation of the protective PE foils properties after exposure in various environments Abstract
Dušan Gaňa, Lenka Markovičová, Tatiana Liptáková
 
Machine Modelling and Simulations 2019 Evaluation of thermal insulation properties and dynamic moisture transfer of knitted fabrics Abstract
Jela Legerská, Darina Ondrušová, Jan Krmela
 
Machine Modelling and Simulations 2019 Experimental and numerical tests of clinch connections strength Abstract
Marian Dudziak, Krzysztof Talaśka, Dominik Wilczyński
 
Machine Modelling and Simulations 2019 EXPERIMENTAL DETERMINATION OF CONTINUOUS COOLING TRANSFORMATION DIAGRAM FOR HIGH STRENGTH STEEL OCHN3MFA Abstract
Michal Krbaťa, Jozef Majerík, Igor Barényi, Maroš Eckert
 
Machine Modelling and Simulations 2019 Experimental research of the mechanical properties of the round drive belts made of thermoplastic elastomer Abstract
Krzysztof Wałęsa, Ireneusz Malujda, Jan Górecki
 
Machine Modelling and Simulations 2019 Experimental research of the thermoplastic belt plasticizing process in the hot plate welding Abstract
Krzysztof Wałęsa, Ireneusz Malujda, Dominik Wilczyński
 
Machine Modelling and Simulations 2019 FE modeling of continuous fiber reinforced thermoplastic composite structures produced by additive manufacturing Abstract
Jaroslav Majko, Milan Sága, Milan Vaško, Marián Handrik, Zuzana Ságová
 
Machine Modelling and Simulations 2019 FEM ANALYSIS OF SELECTED CONSTRUCTION BODIES OF THE CONCEPTUAL BIKE Abstract
Karol Grzegorz Konecki, Krzysztof Talaśka, Andrzej Kołodziej
 
Machine Modelling and Simulations 2019 FINITE ELEMENT SIMULATION OF TENSILE TEST OF COMPOSITE MATERIALS MANUFACtURED BY 3D PRINTING Abstract
Milan Zmindak, Pavol Novak, Josef Soukup, Dragan Milosavljevic, Michal Kaco
 
Machine Modelling and Simulations 2019 Generating the cloud of points from the phase images Abstract
Ondrej Štalmach, K Štalmachová, F Bárnik, J Pobijak
 
Machine Modelling and Simulations 2019 Glass surface modification using diffusion coplanar surface barrier discharge (DCSBD) Abstract
Jana Šulcová, Iveta Papučová, Róbert Janík
 
Machine Modelling and Simulations 2019 Granulation Machines with Highly Turbulized Flows: Creation of Software Complex for Technological Design Abstract
Artem Artyukhov, Nadiia Artyukhova, Jan Krmela, Vladimíra Krmelová
 
Machine Modelling and Simulations 2019 Identification of mechanical properties of KORDCARBON-CPREG-200-T-3K-EP1-42-A composite Abstract
Jan Krystek, M Zajíček, R Kottner
 
Machine Modelling and Simulations 2019 Identification, prediction and control of residual stress regulation in surface layers after chip machining Abstract
Andrej Czán, Jozef Holubjak, Ondrej Kubala, Tatiana Czanova, Stanislav Krajcoviech, Richard Joch
 
Machine Modelling and Simulations 2019 Imaging and computer analysis in the shape error measurements and in the cylindrical objects stereometry Abstract
Andrzej Zaborski, Jerzy Winczek
 
Machine Modelling and Simulations 2019 Influence of CNC milling strategies on complex surfaces machining Abstract
Tomáš Dodok, Nadežda Čuboňová, Miroslav Císar, Vitalii Ivanov, Dorota Wiecek
 
Machine Modelling and Simulations 2019 Influence of mounting on hanging bolt lifetime Abstract
Andrej Dubec, Petra Kováčiková, Mariana Janeková
 
Machine Modelling and Simulations 2019 Information and analytical system to monitor operating processes and environmental performance of vehicle propulsion systems Abstract
Vasyl Mateichyk, Milan Saga, Miroslaw Smieszek, Mykola Tsiuman, Nataliia Goridko, Igor Gritsuk, Roman Symonenko
 
Machine Modelling and Simulations 2019 Innovative design of parking brake testing equipment in the laboratory conditions Abstract
Pavol Kurčík, Pavol Šťastniak, Jozef Harušinec
 
Machine Modelling and Simulations 2019 Innovative design solution for a blockade immobilizing long-barrel Mauser-type and related firearms Abstract
Ireneusz Teodor Dziubek, Andrzej Kołodziej, Krzysztof Talaśka
 
Machine Modelling and Simulations 2019 Kinematic Analysis and Distribution of Stress for Five-Item Mechanism by Means of the SolidWorks Program Abstract
Ján Vavro, Ján Vavro, jr.
 
Machine Modelling and Simulations 2019 Kinematic and Dynamic Analysis and Distribution of Stress for Six-Item Mechanism by Means of the SolidWorks Program Abstract
Ján Vavro, Ján Vavro
 
Machine Modelling and Simulations 2019 Localization of damage in composite test specimens. Abstract
Milan Sapieta
 
Machine Modelling and Simulations 2019 Low cycle fatigue of weldable high strength steels WELDOX 960 Abstract
Peter Kopas, František Nový, Marián Handrik, Milan Vaško, Lenka Jakubovičová
 
Machine Modelling and Simulations 2019 MATHEMATICAL MODEL OF THE VEHICLE INITIAL RECTILINEAR MOTION DURING MOVING UPHILL Abstract
Mykola Bulgakov, Serhii Shuklynov, Anatolii Uzhva, Dmytro Leontiev, Viktor Verbitskiy, Maksym Amelin, Olena Volska
 
Machine Modelling and Simulations 2019 Measurement and comparison study of deformation using extensometer and 2D DIC technology Abstract
František Bárnik, Milan Sága, Milan Vaško, Marián Handrik, Peter Kopas, Ondrej Štalmach, Filip Dorčiak
 
Machine Modelling and Simulations 2019 Methods for measuring the position of the centre of gravity of an anthropotechnic human-wheelchair system in dynamic conditions Abstract
Bartosz Wieczorek, Mateusz Kukla, Łukasz Warguła
 
Machine Modelling and Simulations 2019 Model of electricity consumption in a manufacturing company – time series decomposition Abstract
Mária Michalková, Peter Ďurčanský
 
Machine Modelling and Simulations 2019 Modeling of selected mechanical properties of magnetorheological elastomers Abstract
Mateusz Kukla
 
Machine Modelling and Simulations 2019 Modelling of wear out of timing belt’s pulley Abstract
Grzegorz Jan Domek, Andrzej Kołodziej, Michał Wilczyński
 
Machine Modelling and Simulations 2019 Multifactor analysis of experiment parameters on the example of the biomass cutting process Abstract
Dominik Wilczyński
 
Machine Modelling and Simulations 2019 Numerical analysis of thermal phenomena during surface heat treatment of AlZn5.5MgCu aluminum alloy by GTA welding method Abstract
Jerzy Winczek, J Iwaszko, M Matuszewski
 
Machine Modelling and Simulations 2019 Numerical analysis of thin-walled component structure Abstract
Radosław Pytliński, Dominik Wojtkowiak, Krzysztof Talaśka
 
Machine Modelling and Simulations 2019 Numerical and experimental analysis of a laser welded joint made of dissimilar materials S355 and 304 steel Abstract
Zbigniew Saternus, Wiesława Piekarska, Milan Sapieta, Peter Kopas
 
Machine Modelling and Simulations 2019 Numerical estimation of heat affected zone in spirally laser quenched shaft Abstract
Tomasz Domański, Milan Sága, Marcin Kubiak, Zbigniew Saternus, Pavol Novák
 
Machine Modelling and Simulations 2019 Numerical Study Of Linearization Techniques For Bouc-Wen Hysteresis Model Considering Random Inputs Abstract
Milan Sága, Milan Vaško, Zuzana Ságová, Marián Handrik, Peter Kopas, Lenka Jakubovičová, Vitaly Muraviev, Olga Muravieva
 
Machine Modelling and Simulations 2019 On one method how to find optimal parameters for some technical problems Abstract
Ladislav Matejíčka
 
Machine Modelling and Simulations 2019 Possibilities of modelling the bolts in program ANSYS Abstract
Jozef Bocko, Pavol Lengvarský, Róbert Huňady
 
Machine Modelling and Simulations 2019 Pre-clinical testing of different implant structures in animal subjects Abstract
Lukáš Mitrík, Marianna Trebuňová, Radovan Hudák, Marek Schnitzer, Jozef Živčák
 
Machine Modelling and Simulations 2019 Preliminary analysis of the sensitivity of the algebraic dry ice agglomeration model using multi-channel dies to change their geometrical parameters. Abstract
Jan Górecki
 
Machine Modelling and Simulations 2019 Preliminary research of strength of glued connections of plastic elements Abstract
Aleksandra Fierek, Ireneusz Malujda, Dominik Wilczyński, Konrad Walesa
 
Machine Modelling and Simulations 2019 Reduction of the value of the bend deflection arising due to external forces and gravity by applying the tensile stress to the axial alignment. Abstract
Paweł Knast
 
Machine Modelling and Simulations 2019 Research and application of PLA fibre Abstract
Michal Kleščík, Bibiana Bizubová, Tomáš Zatroch, Alena Balogová, Luis Alberto Rivera Pedraza, Petra Skalková, Vladimíra Krmelová, Jan Krmela, Erna Muks, Lien Van Der Schueren
 
Machine Modelling and Simulations 2019 Research of vehicle control informative functioning capacity Abstract
Ivan Kuric, Oleksandr Gorobchenko, Oleksandra Litikova, Igor Gritsuk, Vasyl Mateichyk, Mykola Bulgakov, Ivana Klackova
 
Machine Modelling and Simulations 2019 Research on the compaction process of loose materials with use of helix technology Abstract
Maciej Berdychowski, Dominik Wilczyński, Krzysztof Wałęsa, Jan Górecki
 
Machine Modelling and Simulations 2019 Sensitivity study of spindle assembly used for thermal displacement reduction Abstract
Václav Marek, Z Hudec
 
Machine Modelling and Simulations 2019 Simplified approach for creep evaluation in superheaters Abstract
Martin Naď, Pavel Lošák, Tomáš Létal, Marek Pernica
 
Machine Modelling and Simulations 2019 Simulation of child passenger collision in the rail vehicle interior Abstract
Stanislav Spirk, Jan Vychytil
 
Machine Modelling and Simulations 2019 Simulation of rifled tubes drawing process Abstract
Dusan Sutak, J Zajac, M Hatala, F Botko, P Čižmár, A Bittner, P Beták
 
Machine Modelling and Simulations 2019 Simulation of the impact bar top layer tensile test applying the Finite Elements Method Abstract
Daniela Marasová, Ľubomír Ambriško, Ľuboš Caban, Karol Semrád
 
Machine Modelling and Simulations 2019 SIMULATION OF WOOD BIOMASS COMBUSTION IN HOT WATER BOILER Abstract
Ivana Klačková, Ivan Zajačko, Richard Lenhard, Igor Gritsuk, Dariusz Wiecek
 
Machine Modelling and Simulations 2019 Static tests the stiffness of car tires Abstract
Marian Dudziak, Andrzej Lewandowski, Konrad Jan Waluś
 
Machine Modelling and Simulations 2019 Static-structural stress analysis of double row deep groove ball bearing Abstract
Peter Šulka
 
Machine Modelling and Simulations 2019 Statistical analysis of the wind speed at mountain site Chopok, Slovakia, using Weibull distribution Abstract
Ivana Pobočíková, Zuzana Sedliačková, Ján Šimon, Daniela Jurášová
 
Machine Modelling and Simulations 2019 Stress analysis of specimen with a reinforced thin layer Abstract
Marián Handrik, Milan Vaško, J Majko, Peter Kopas, Lenka Jakubovičová, Radim Halama, Martin Fusek
 
Machine Modelling and Simulations 2019 Structure and properties of nucleated polypropylene fibres Abstract
Vladimíra Krmelová, Mária Gavendová, Tomáš Zatroch, Jan Krmela, Andrej Dubec, Bibiana Bizubová, Michal Kleščík, Alena Balogová
 
Machine Modelling and Simulations 2019 Study of microstructure of selected dental restoration parts Abstract
Daniela Koštialiková, Mariana Janeková, Andrej Dubec, Petra Kováčiková, Františka Pešlová
 
Machine Modelling and Simulations 2019 Study of structural changes in thermoplastics using dynamic mechanical analysis Abstract
Marcel Kohutiar, Róbert Janík, Mariana Pajtášová, Darina Ondrušová, Ivan Labaj, V Zvoláneková Mezencevová
 
Machine Modelling and Simulations 2019 Surface properties of non-black fillers Abstract
Petra Skalková, Andrej Dubec, Jana Pagáčová, Jan Krmela, Jakub Martinec
 
Machine Modelling and Simulations 2019 Synthesis and sensitivity analysis of the crank-rocker mechanism Abstract
Alžbeta Sapietová, O Štalmach, M Sapieta
 
Machine Modelling and Simulations 2019 Testing functional features of V-belt transmissions Abstract
Piotr Krawiec, Mariana Pajtášová, Florian Meler, Łukasz Warguła
 
Machine Modelling and Simulations 2019 The application of the Finite Element Method analyses in the process of designing the punching die for belt perforation Abstract
Dominik Wojtkowiak, Krzysztof Talaśka, Aleksandra Fierek
 
Machine Modelling and Simulations 2019 The Cam-Clay model in the application of technological process modeling Abstract
Maciej Berdychowski, Dominik Wilczyński, Krzysztof Talaśka, Dominik Wojtkowiak
 
Machine Modelling and Simulations 2019 The design issues of rolling bearing assemblies Abstract
Krzysztof Talaśka, Dominik Wojtkowiak, Aleksandra Fierek
 
Machine Modelling and Simulations 2019 The Effect of Temperature and Storage Time on Mechanical Properties of Polyamides Abstract
Dana Bakošová
 
Machine Modelling and Simulations 2019 The effect of various alternative filler granularity on the properties of elastomeric vulcanizate Abstract
Ivan Labaj, Darina Ondrušová, Juliána Vršková, Marcel Kohutiar
 
Machine Modelling and Simulations 2019 THE FAULT TREE SIMULATION MODELING Abstract
Alexej Chovanec, Pavol Mikuš, Alena Breznická
 
Machine Modelling and Simulations 2019 THE FAULT TREE STOCHASTIC ANALYSIS Abstract
Alexej Chovanec, Alena Breznická, Pavol Mikuš
 
Machine Modelling and Simulations 2019 The heat treatment impact on microstucture quality of 14 260 bearing steel Abstract
Ján Vavro jr., Františka Pešlová
 
Machine Modelling and Simulations 2019 The impact of DCSBD Plasma Discharge on polypropylene Abstract
Róbert Janík, Marcel Kohutiar, Mariana Pajtášová, Andrej Dubec, Jana Pagáčová, Jana Šulcová
 
Machine Modelling and Simulations 2019 The impact of support points during the measurement of machine tool bodies on Coordinate Measuring Machines Abstract
Roman Michalski, Rafał Kwiatkowski
 
Machine Modelling and Simulations 2019 The impact of welding technology on the manufacture of metal baskets Abstract
Mariana Janeková, Daniela Koštialiková, Andrej Dubec, Petra Kováčiková, Františka Pešlová
 
Machine Modelling and Simulations 2019 The impact of wheelchairs driving support systems on the rolling resistance coefficient Abstract
Łukasz Warguła, Mateusz Kukla, Bartosz Wieczorek
 
Machine Modelling and Simulations 2019 The influence of corrosion of inorganic-organic films on their surface properties Abstract
Iveta Papučová, Jana Pagáčová, Alfonz Plško
 
Machine Modelling and Simulations 2019 The influence of corrosion of TiO2 films on their surface properties Abstract
Jana Pagáčová, Iveta Papučová, Jana Šulcová, Alfonz Plško
 
Machine Modelling and Simulations 2019 The influence of imperfections on dynamic properties of oscillating rod Abstract
Vladimir Dekys, Pavol Novak, Dragan Milosavljevic, Marek Nekoranec, Ondrej Stalmach
 
Machine Modelling and Simulations 2019 The influence of iron-ore concentrate on the kinetics of curing and aging processes of butadiene-styrene rubber based blends in presence of different accelerators Abstract
Aram A. Khachaturov, Evgenii E. Potapov, Darina Ondrušová, Mariana Pajtášová, Jan Krmela, Vladimíra Krmelová
 
Machine Modelling and Simulations 2019 The influence of the limit stress value on the sublimation rate during the dry ice densification process Abstract
Jan Górecki, Aleksandra Fierek, Krzysztof Talaśka, Krzysztof Wałęsa
 
Machine Modelling and Simulations 2019 The monitoring system of the grinding for polymers and biological products Abstract
Marek Macko, Józef Flizikowski, Krzysztof Tyszczuk, Grzegorz Śmigielski, Adam Mroziński
 
Machine Modelling and Simulations 2019 The problem of fixing the axisymmetric elements on the example of pulley mounting on the shaft Abstract
Grzegorz Jan Domek, Andrzej Kołodziej, Ireneusz Dziubek
 
Machine Modelling and Simulations 2019 The requirements for the design of dual-mass flywheels Abstract
Robert Grega, Lenka Jakubovičová, Milan Sága
 
Machine Modelling and Simulations 2019 The research on the characteristic of the cutting force while chipping of the Caucasian Fir (Abies Nordmanniana) with a single-shaft wood chipper Abstract
Łukasz Warguła, Piotr Krawiec
 
Machine Modelling and Simulations 2019 The study of mechanical properties of magnetorheological elastomers under compressive stress Abstract
Mateusz Kukla, Aleksandra Fierek, Maciej Berdychowski, Michał Kończak
 
Machine Modelling and Simulations 2019 The threaded part wear of the tensioner with lock nut Abstract
Petra Kováčiková, Andrej Dubec, Daniela Koštialiková
 
Machine Modelling and Simulations 2019 Thermal-stress analysis of vulcanization molds to determine the dilatation gap between aluminum segments Abstract
Milan Vaško, Milan Sága, Zuzana Ságová, Marián Handrik, Peter Kopas, Lenka Jakubovičová, Vitaly V. Muraviev, Olga V. Muravieva
 
Machine Modelling and Simulations 2019 TIGHTNESS OF FLANGE JOINTS: A CASE STUDY Abstract
Pavel Lošák, Tomáš Létal, Martin Naď, Marek Pernica
 
Machine Modelling and Simulations 2019 Topology optimization of B-pillar with respect to mesh type and size Abstract
Zdenek Chval, Karel Ráž
 
Machine Modelling and Simulations 2019 Using of wood ash as the alternative filler for preparation of rubber mixtures Abstract
Andrea Feriancová, Beáta Pecušová, Mariana Pajtášová, Katarína Moricová
 
Machine Modelling and Simulations 2019 Vehicle collision simulation based on non-classic tire traces Abstract
Michał Śledziński, Andrzej Lewandowski
 
1 - 130 of 130 Items


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.

Supported by: Uniwersytet Kazimierza Wielkiego w Bydgoszczy