Conference Papers
| Experimental research of the thermoplastic belt plasticizing process in the hot plate welding | |
| Krzysztof Wałęsa, Ireneusz Malujda, Dominik Wilczyński |
| Evaluate of the influence of time delays on effectiveness of nonlinear saturation controller. Part I: Modeling | |
| Andrzej Mitura, Rafal Rusinek |
| Evaluate of the influence of time delays on effectiveness of nonlinear saturation controller. Part II: Numerical results | |
| Andrzej Mitura, Rafal Rusinek |
| Analysis of size of shredded particles in a multi-disc grinder | |
| G Smigielski, Krzysztof Tyszczuk, A Mroziński |
| Modeling of selected mechanical properties of magnetorheological elastomers | |
| Mateusz Kukla |
| Elastomer modification by means of ionizing radiation | |
| Valeryia Bobrova, Andrei Kasperovich, A Mozyrev, Jan Krmela, Vladimíra Krmelová |
| Structure and properties of nucleated polypropylene fibres | |
| Vladimíra Krmelová, Mária Gavendová, Tomáš Zatroch, Jan Krmela, Andrej Dubec, Bibiana Bizubová, Michal Kleščík, Alena Balogová |
| The monitoring system of the grinding for polymers and biological products | |
| Marek Macko, Józef Flizikowski, Krzysztof Tyszczuk, Grzegorz Śmigielski, Adam Mroziński |
| 3D technology implementation in medicine | |
| Marek Macko, Zbigniew Szczepański, Dariusz Mikołajewski, Emilia Mikołajewska, Jacek Furtak |
| Numerical analysis of thermal phenomena during surface heat treatment of AlZn5.5MgCu aluminum alloy by GTA welding method | |
| Jerzy Winczek, J Iwaszko, M Matuszewski |
| Experimental research of the mechanical properties of the round drive belts made of thermoplastic elastomer | |
| Krzysztof Wałęsa, Ireneusz Malujda, Jan Górecki |
| Dynamic properties of pneumatic transport in a oilseed grinder | |
| Grzegorz Śmigielski, Krzysztof Tyszczuk, Adam Mroziński, Kazimierz Peszyński |
| Analysis of residual stresses on guide bar of chainsaw | |
| Ján Kostka, Peter Čarák, Peter Frankovský, Matúš Adamuščin |
| Analysis of shaft selection in terms of stiffness and mass | |
| Aleksandra Fierek, Ireneusz Malujda, Dominik Wilczyński, Krzysztof Wałęsa |
| Preliminary analysis of the sensitivity of the algebraic dry ice agglomeration model using multi-channel dies to change their geometrical parameters. | |
| Jan Górecki |
| Reduction of the value of the bend deflection arising due to external forces and gravity by applying the tensile stress to the axial alignment. | |
| Paweł Knast |
| Assessment of traffic noise for medium heavy vehicles in octave bands | |
| Andrzej Bąkowski, Vladimir Dekýš, Leszek Radziszewski, Paweł Świetlik |
| The influence of the limit stress value on the sublimation rate during the dry ice densification process | |
| Jan Górecki, Aleksandra Fierek, Krzysztof Talaśka, Krzysztof Wałęsa |
| Kinematic and Dynamic Analysis and Distribution of Stress for Six-Item Mechanism by Means of the SolidWorks Program | |
| Ján Vavro, Ján Vavro |
| Stress analysis of specimen with a reinforced thin layer | |
| Marián Handrik, Milan Vaško, J Majko, Peter Kopas, Lenka Jakubovičová, Radim Halama, Martin Fusek |
| Design of new multifunctional clamping jaws for thermomechanical simulator | |
| Tomas Kalina, Vaclav Marek, Stepan Jenicek, Frantisek Sedlacek, Zdenek Chval |
| Sensitivity study of spindle assembly used for thermal displacement reduction | |
| Václav Marek, Z Hudec |
| Granulation Machines with Highly Turbulized Flows: Creation of Software Complex for Technological Design | |
| Artem Artyukhov, Nadiia Artyukhova, Jan Krmela, Vladimíra Krmelová |
| Complex designing of granulation units with application of computer and software modeling: case "Vortex granulator" | |
| Artem Artyukhov, Nadiia Artyukhova, Jan Krmela, Vladimíra Krmelová |
| Methods for measuring the position of the centre of gravity of an anthropotechnic human-wheelchair system in dynamic conditions | |
| Bartosz Wieczorek, Mateusz Kukla, Łukasz Warguła |
| Analysis of stability of stressed-skin constructions for transport of bulk raw materials | |
| Marian Dudziak, Paweł Knast, Krzysztof Talaśka |
| Determination of the vibration emission level for a chipper with combustion engine | |
| Michał Kończak, Mateusz Kukla, Łukasz Warguła, K Talaska |
| Identification of mechanical properties of KORDCARBON-CPREG-200-T-3K-EP1-42-A composite | |
| Jan Krystek, M Zajíček, R Kottner |
| Topology optimization of B-pillar with respect to mesh type and size | |
| Zdenek Chval, Karel Ráž |
| Simulation of child passenger collision in the rail vehicle interior | |
| Stanislav Spirk, Jan Vychytil |
| The impact of support points during the measurement of machine tool bodies on Coordinate Measuring Machines | |
| Roman Michalski, Rafał Kwiatkowski |
| The impact of wheelchairs driving support systems on the rolling resistance coefficient | |
| Łukasz Warguła, Mateusz Kukla, Bartosz Wieczorek |
| The application of the Finite Element Method analyses in the process of designing the punching die for belt perforation | |
| Dominik Wojtkowiak, Krzysztof Talaśka, Aleksandra Fierek |
| The study of mechanical properties of magnetorheological elastomers under compressive stress | |
| Mateusz Kukla, Aleksandra Fierek, Maciej Berdychowski, Michał Kończak |
| Evaluation of thermal insulation properties and dynamic moisture transfer of knitted fabrics | |
| Jela Legerská, Darina Ondrušová, Jan Krmela |
| The Effect of Temperature and Storage Time on Mechanical Properties of Polyamides | |
| Dana Bakošová |
| Influence of mounting on hanging bolt lifetime | |
| Andrej Dubec, Petra Kováčiková, Mariana Janeková |
| The threaded part wear of the tensioner with lock nut | |
| Petra Kováčiková, Andrej Dubec, Daniela Koštialiková |
| Using of wood ash as the alternative filler for preparation of rubber mixtures | |
| Andrea Feriancová, Beáta Pecušová, Mariana Pajtášová, Katarína Moricová |
| Static-structural stress analysis of double row deep groove ball bearing | |
| Peter Šulka |
| Numerical Study Of Linearization Techniques For Bouc-Wen Hysteresis Model Considering Random Inputs | |
| Milan Sága, Milan Vaško, Zuzana Ságová, Marián Handrik, Peter Kopas, Lenka Jakubovičová, Vitaly Muraviev, Olga Muravieva |
| 3D simulations of solidification with liquid phase flow | |
| Elżbieta Gawrońska, Robert Dyja |
| Construction design and structural analyse of transfer system | |
| Lenka Jakubovičová, Peter Kopas, Marián Handrik, Milan Vaško, Róbert Grega, Peter Šulka |
| Low cycle fatigue of weldable high strength steels WELDOX 960 | |
| Peter Kopas, František Nový, Marián Handrik, Milan Vaško, Lenka Jakubovičová |
| Kinematic Analysis and Distribution of Stress for Five-Item Mechanism by Means of the SolidWorks Program | |
| Ján Vavro, Ján Vavro, jr. |
| Thermal-stress analysis of vulcanization molds to determine the dilatation gap between aluminum segments | |
| Milan Vaško, Milan Sága, Zuzana Ságová, Marián Handrik, Peter Kopas, Lenka Jakubovičová, Vitaly V. Muraviev, Olga V. Muravieva |
| Localization of damage in composite test specimens. | |
| Milan Sapieta |
| Synthesis and sensitivity analysis of the crank-rocker mechanism | |
| Alžbeta Sapietová, O Štalmach, M Sapieta |
| Control of the TTM positioner based on correcting procedures | |
| Maciej Bodnicki, Wojciech Credo, Karol Bagiński, Michał Bartyś, Leszek Wawrzyniuk |
| Possibilities of modelling the bolts in program ANSYS | |
| Jozef Bocko, Pavol Lengvarský, Róbert Huňady |
| Static tests the stiffness of car tires | |
| Marian Dudziak, Andrzej Lewandowski, Konrad Jan Waluś |
| Imaging and computer analysis in the shape error measurements and in the cylindrical objects stereometry | |
| Andrzej Zaborski, Jerzy Winczek |
| The influence of imperfections on dynamic properties of oscillating rod | |
| Vladimir Dekys, Pavol Novak, Dragan Milosavljevic, Marek Nekoranec, Ondrej Stalmach |
| Surface properties of non-black fillers | |
| Petra Skalková, Andrej Dubec, Jana Pagáčová, Jan Krmela, Jakub Martinec |
| Vehicle collision simulation based on non-classic tire traces | |
| Michał Śledziński, Andrzej Lewandowski |
| FINITE ELEMENT SIMULATION OF TENSILE TEST OF COMPOSITE MATERIALS MANUFACtURED BY 3D PRINTING | |
| Milan Zmindak, Pavol Novak, Josef Soukup, Dragan Milosavljevic, Michal Kaco |
| Development and design of new mechanical forging presses | |
| Martin Zahalka, K Raz |
| FE modeling of continuous fiber reinforced thermoplastic composite structures produced by additive manufacturing | |
| Jaroslav Majko, Milan Sága, Milan Vaško, Marián Handrik, Zuzana Ságová |
| Modelling of wear out of timing belt’s pulley | |
| Grzegorz Jan Domek, Andrzej Kołodziej, Michał Wilczyński |
| The problem of fixing the axisymmetric elements on the example of pulley mounting on the shaft | |
| Grzegorz Jan Domek, Andrzej Kołodziej, Ireneusz Dziubek |
| Effect of alternative filler from glass industry on the selected properties of friction polymer matrix in automotive industry | |
| Juliána Vršková, Darina Ondrušová, Ivan Labaj, Ivan Kopal |
| The effect of various alternative filler granularity on the properties of elastomeric vulcanizate | |
| Ivan Labaj, Darina Ondrušová, Juliána Vršková, Marcel Kohutiar |
| Application of alternative additives in the polymer composite systems used in automotive industry | |
| Darina Ondrušová, Ivan Labaj, Juliána Vršková, Mariana Pajtášová, V Zvoláneková Mezencevová |
| The influence of iron-ore concentrate on the kinetics of curing and aging processes of butadiene-styrene rubber based blends in presence of different accelerators | |
| Aram A. Khachaturov, Evgenii E. Potapov, Darina Ondrušová, Mariana Pajtášová, Jan Krmela, Vladimíra Krmelová |
| Glass surface modification using diffusion coplanar surface barrier discharge (DCSBD) | |
| Jana Šulcová, Iveta Papučová, Róbert Janík |
| Preliminary research of strength of glued connections of plastic elements | |
| Aleksandra Fierek, Ireneusz Malujda, Dominik Wilczyński, Konrad Walesa |
| Multifactor analysis of experiment parameters on the example of the biomass cutting process | |
| Dominik Wilczyński |
| Measurement and comparison study of deformation using extensometer and 2D DIC technology | |
| František Bárnik, Milan Sága, Milan Vaško, Marián Handrik, Peter Kopas, Ondrej Štalmach, Filip Dorčiak |
| Biomass cutting tests to determine the lowest value of the process force | |
| Dominik Wilczyński, Krzysztof Wałęsa, Maciej Berdychowski, Mateusz Kukla |
| Energy optimal trajectories for electro-mechanical systems | |
| Pavol Oršanský, Branislav Ftorek, Ján Vittek |
| MATHEMATICAL MODEL OF THE VEHICLE INITIAL RECTILINEAR MOTION DURING MOVING UPHILL | |
| Mykola Bulgakov, Serhii Shuklynov, Anatolii Uzhva, Dmytro Leontiev, Viktor Verbitskiy, Maksym Amelin, Olena Volska |
| Information and analytical system to monitor operating processes and environmental performance of vehicle propulsion systems | |
| Vasyl Mateichyk, Milan Saga, Miroslaw Smieszek, Mykola Tsiuman, Nataliia Goridko, Igor Gritsuk, Roman Symonenko |
| Research of vehicle control informative functioning capacity | |
| Ivan Kuric, Oleksandr Gorobchenko, Oleksandra Litikova, Igor Gritsuk, Vasyl Mateichyk, Mykola Bulgakov, Ivana Klackova |
| Analysis of the guiding column and sleeve cooperation in the linear slide bearing of the punching die head-punch block | |
| Dominik Wojtkowiak, Krzysztof Talaśka, Maciej Berdychowski |
| The design issues of rolling bearing assemblies | |
| Krzysztof Talaśka, Dominik Wojtkowiak, Aleksandra Fierek |
| Statistical analysis of the wind speed at mountain site Chopok, Slovakia, using Weibull distribution | |
| Ivana Pobočíková, Zuzana Sedliačková, Ján Šimon, Daniela Jurášová |
| Analysis of threaded connections under impact load | |
| Krzysztof Talaśka, Dominik Wojtkowiak |
| SIMULATION OF WOOD BIOMASS COMBUSTION IN HOT WATER BOILER | |
| Ivana Klačková, Ivan Zajačko, Richard Lenhard, Igor Gritsuk, Dariusz Wiecek |
| Influence of CNC milling strategies on complex surfaces machining | |
| Tomáš Dodok, Nadežda Čuboňová, Miroslav Císar, Vitalii Ivanov, Dorota Wiecek |
| Generating the cloud of points from the phase images | |
| Ondrej Štalmach, K Štalmachová, F Bárnik, J Pobijak |
| Analysis of angular deflection of bearing node in machine with toothed transport belt | |
| Maciej Berdychowski, Ireneusz Malujda, Krzysztof Wałęsa, Aleksandra Fierek |
| Application of the Mohr-Coulomb model for the simulation of the biomass compaction process | |
| Maciej Berdychowski, Krzysztof Talaśka, Ireneusz Malujda, Mateusz Kukla |
| Analysis of heat transfer coefficients for simulation of the heat exchange between oil and the internal cavity faces of the isolated piston at variable gravity conditions | |
| Aleksandr Bilohub, Nguyen Van Duong, Feliks Sirenko, Volodymyr Savchuk, Ievgen Bilousov, Roman Symonenko, Ivan Zajačko |
| Analysis and structuring diagnostic large volume data of technical condition of complex equipment in transport | |
| Vladimir Vychuzhanin, Nickola Rudnichenko, Zuzana Sagova, Miroslaw Smieszek, Vasyl Cherniavskyi, Andrii Golovan, Mykyta Volodarets |
| An application of the Kalman filter in automated guided vehicles | |
| Magdalena Dobrzanska, Pawel Dobrzanski |
| Digital filtration methods in selected industrial applications | |
| Pawel Dobrzanski, Magdalena Dobrzanska |
| Determination of engine oil characteristics | |
| Katarína Moricová, Iveta Papučova, Silvia Ďurišová, Robert Janík |
| The Cam-Clay model in the application of technological process modeling | |
| Maciej Berdychowski, Dominik Wilczyński, Krzysztof Talaśka, Dominik Wojtkowiak |
| Research on the compaction process of loose materials with use of helix technology | |
| Maciej Berdychowski, Dominik Wilczyński, Krzysztof Wałęsa, Jan Górecki |
| Comparison of experimental flexural test with FE analysis for specimen with different size and shape of internal structure created by 3D printing's | |
| Filip Dorčiak, Milan Vaško, František Bárnik, Jaroslav Majko |
| Model of electricity consumption in a manufacturing company – time series decomposition | |
| Mária Michalková, Peter Ďurčanský |
| Computation of temperature field by cell method and comparing with commercial software | |
| Marek Pernica, Tomáš Létal, Pavel Lošák, Martin Naď |
| FEM ANALYSIS OF SELECTED CONSTRUCTION BODIES OF THE CONCEPTUAL BIKE | |
| Karol Grzegorz Konecki, Krzysztof Talaśka, Andrzej Kołodziej |
| Design problems of axisymmetric connections in the aspect of machine engineering drawings | |
| Andrzej Kołodziej, Marian Dudziak, Krzysztof Talaśka |
| Numerical analysis of thin-walled component structure | |
| Radosław Pytliński, Dominik Wojtkowiak, Krzysztof Talaśka |
| Simplified approach for creep evaluation in superheaters | |
| Martin Naď, Pavel Lošák, Tomáš Létal, Marek Pernica |
| Testing functional features of V-belt transmissions | |
| Piotr Krawiec, Mariana Pajtášová, Florian Meler, Łukasz Warguła |
| The research on the characteristic of the cutting force while chipping of the Caucasian Fir (Abies Nordmanniana) with a single-shaft wood chipper | |
| Łukasz Warguła, Piotr Krawiec |
| The influence of corrosion of inorganic-organic films on their surface properties | |
| Iveta Papučová, Jana Pagáčová, Alfonz Plško |
| The impact of welding technology on the manufacture of metal baskets | |
| Mariana Janeková, Daniela Koštialiková, Andrej Dubec, Petra Kováčiková, Františka Pešlová |
| CAE analysis and simulations of technological processes of selected high strength steels | |
| Jozef Majerík, Igor Barényi, Michal Ladecký, Michal Krbaťa |
| EXPERIMENTAL DETERMINATION OF CONTINUOUS COOLING TRANSFORMATION DIAGRAM FOR HIGH STRENGTH STEEL OCHN3MFA | |
| Michal Krbaťa, Jozef Majerík, Igor Barényi, Maroš Eckert |
| Effect of deformation parameters on microstructure evolution and properties of 33NiCrMoV15 steel | |
| Igor Barényi, Michal Krbaťa, Jozef Majerík, Ivana Mikušová |
| Evaluation of the protective PE foils properties after exposure in various environments | |
| Dušan Gaňa, Lenka Markovičová, Tatiana Liptáková |
| Study of structural changes in thermoplastics using dynamic mechanical analysis | |
| Marcel Kohutiar, Róbert Janík, Mariana Pajtášová, Darina Ondrušová, Ivan Labaj, V Zvoláneková Mezencevová |
| The impact of DCSBD Plasma Discharge on polypropylene | |
| Róbert Janík, Marcel Kohutiar, Mariana Pajtášová, Andrej Dubec, Jana Pagáčová, Jana Šulcová |
| Innovative design solution for a blockade immobilizing long-barrel Mauser-type and related firearms | |
| Ireneusz Teodor Dziubek, Andrzej Kołodziej, Krzysztof Talaśka |
| Experimental and numerical tests of clinch connections strength | |
| Marian Dudziak, Krzysztof Talaśka, Dominik Wilczyński |
| THE FAULT TREE STOCHASTIC ANALYSIS | |
| Alexej Chovanec, Alena Breznická, Pavol Mikuš |
| THE FAULT TREE SIMULATION MODELING | |
| Alexej Chovanec, Pavol Mikuš, Alena Breznická |
| Study of microstructure of selected dental restoration parts | |
| Daniela Koštialiková, Mariana Janeková, Andrej Dubec, Petra Kováčiková, Františka Pešlová |
| The influence of corrosion of TiO2 films on their surface properties | |
| Jana Pagáčová, Iveta Papučová, Jana Šulcová, Alfonz Plško |
| Construction proposal of shipping bulk container | |
| ROBERT POKLEMBA, J Zajac, D Goldyniak, I Olexa, M Dilýová |
| Simulation of rifled tubes drawing process | |
| Dusan Sutak, J Zajac, M Hatala, F Botko, P Čižmár, A Bittner, P Beták |
| The requirements for the design of dual-mass flywheels | |
| Robert Grega, Lenka Jakubovičová, Milan Sága |
| TIGHTNESS OF FLANGE JOINTS: A CASE STUDY | |
| Pavel Lošák, Tomáš Létal, Martin Naď, Marek Pernica |
| Dynamic modelling of elastic plates reinforced by strong fibres | |
| Dragan Milosavljevic, Alzbeta Sapietova, Milan Zmindak, Vladimir Dekys, Pavol Novak |
| On one method how to find optimal parameters for some technical problems | |
| Ladislav Matejíčka |
| Numerical and experimental analysis of a laser welded joint made of dissimilar materials S355 and 304 steel | |
| Zbigniew Saternus, Wiesława Piekarska, Milan Sapieta, Peter Kopas |
| Numerical estimation of heat affected zone in spirally laser quenched shaft | |
| Tomasz Domański, Milan Sága, Marcin Kubiak, Zbigniew Saternus, Pavol Novák |
| Research and application of PLA fibre | |
| Michal Kleščík, Bibiana Bizubová, Tomáš Zatroch, Alena Balogová, Luis Alberto Rivera Pedraza, Petra Skalková, Vladimíra Krmelová, Jan Krmela, Erna Muks, Lien Van Der Schueren |
| Dynamic analysis of an freight railway wagon for safe rides along an S-shaped curve | |
| Pavol Šťastniak, Marián Moravčík |
| Innovative design of parking brake testing equipment in the laboratory conditions | |
| Pavol Kurčík, Pavol Šťastniak, Jozef Harušinec |
| Calculation of stiffness of triple spring in a rail vehicle | |
| Andrej Suchánek, Mária Loulová |
| Determination of the strength of a flat wagon by elastic viscous interaction with tank containers | |
| Oleksij Fomin, Juraj Gerlici, Alyona Lovska, Tomas Lack, Natalia Bykovets, Halyna Shatkovska, Kateryna Kravchenko |
| Identification, prediction and control of residual stress regulation in surface layers after chip machining | |
| Andrej Czán, Jozef Holubjak, Ondrej Kubala, Tatiana Czanova, Stanislav Krajcoviech, Richard Joch |
| Analysis of residual stresses of aging austenitic steel designed for nuclear industry | |
| Michal Sajgalik, Jozef Holubjak, Ondrej Kubala, Michal Richtarik, Tatiana Czanova, Mario Drbul |
| Simulation of the impact bar top layer tensile test applying the Finite Elements Method | |
| Daniela Marasová, Ľubomír Ambriško, Ľuboš Caban, Karol Semrád |
| The heat treatment impact on microstucture quality of 14 260 bearing steel | |
| Ján Vavro jr., Františka Pešlová |
| Pre-clinical testing of different implant structures in animal subjects | |
| Lukáš Mitrík, Marianna Trebuňová, Radovan Hudák, Marek Schnitzer, Jozef Živčák |
This work is licensed under a Creative Commons Attribution 4.0 License.
Web page supported by Univerzity of Žilina.